ANA01 Weekly, seasonal and annual measurement of precipitation volume and chemistry collected as part of the National Atmospheric Deposition Program at Konza Prairie

Summary

Short name: 

ANA01

Abstract: 

Data set contains results of chemical analysis of wetfall samples collected on Konza Prairie. Analysis is done by the Central Analytical Lab (CAL), Champaign, IL as part of the National Atmospheric Deposition Program (NADP). NADP data products available on the NADP/NTN web site (nadp.slh.wisc.edu/data/NTN/) include: Annual Data Summaries, Semiannual Data Reports, Annual and Seasonal Averages, Monthly Averages, and Weekly data. Konza Prairie LTER archives and provides the weekly data in electronic form before May 2019.

Published on EDI/LTER Data Portal

Citation Suggestion: 

Blair, J. M. 2023. ANA01 Weekly, seasonal and annual measurement of precipitation volume and chemistry collected as part of the National Atmospheric Deposition Program at Konza Prairie . Environmental Data Initiative. http://dx.doi.org/10.6073/pasta/295644787ee8a1c00edd6f48dde75c4e.

Data set ID: 

3

EML revision ID: 

15

Data sources: 

Variables: 

calcode
  • Label:
  • Definition: Alpha-numeric site identification code, first two characters of which are the abbreviation of the state in which the site is located (Konza Prairie Cal code is KS31).
  • Type: Nominal
  • Missing values: None specified
dateOn
  • Label:
  • Definition: Date sample bucket was installed on the collector, reported in Greenwich mean time (GMT) (yyyymmdd)
  • Type: Date/time
  • Date format: YYYY-MM-DD
  • Missing values: None specified
dateOff
  • Label:
  • Definition: Date sample bucket was removed from the collector, reported in Greenwich mean time (GMT) (yymmdd)
  • Type: Date/time
  • Date format: YYYY-MM-DD
  • Missing values: None specified
limitCA
  • Label:
  • Definition: Limit of Detection Symbol for CA
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conCA
  • Label:
  • Definition: Ca concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.01
  • Missing values:
    • . = Missing or Not Measured
limitMg
  • Label:
  • Definition: Limit of detection symbol for Mg
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conMg
  • Label:
  • Definition: Mg concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.001
  • Missing values:
    • . = Missing or Not Measured
limitK
  • Label:
  • Definition: Limitof detection symbol for K
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conK
  • Label:
  • Definition: K concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.001
  • Missing values:
    • . = Missing or Not Measured
limitNa
  • Label:
  • Definition: Limite of detection symbol for Na
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conNa
  • Label:
  • Definition: Na concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.001
  • Missing values:
    • . = Missing or Not Measured
limitNH4
  • Label:
  • Definition: Limit of detection symbol for NH4
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conNH4
  • Label:
  • Definition: NH4 concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.01
  • Missing values:
    • . = Missing or Not Measured
limitNO3
  • Label:
  • Definition: limit ofdetection symbol for NO3
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conNO3
  • Label:
  • Definition: NO3 concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.01
  • Missing values:
    • . = Missing or Not Measured
limitCl
  • Label:
  • Definition: limit of detection symbol for Cl
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conCl
  • Label:
  • Definition: Cl concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.01
  • Missing values:
    • . = Missing or Not Measured
limitSO4
  • Label:
  • Definition: limit of detection symbol for SO4
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • blank = Missing or Not Measured
conSO4
  • Label:
  • Definition: SO4 concentration
  • Type: Physical quantity
  • Unit: milligramsPerLiter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.01
  • Missing values:
    • . = Missing or Not Measured
labpH
  • Label:
  • Definition: pH of precipitation sample as measured at CAL
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • . = Missing or Not Measured
fieldpH
  • Label:
  • Definition: pH of the precipitation sample as measured on site (Bushnell Hall)
  • Type: Physical quantity
  • Unit: number
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • . = Missing or Not Measured
pHFV
  • Label:
  • Definition: field pH indicator
  • Type: Nominal
  • Missing values: None specified
labConduct
  • Label:
  • Definition: conductivity of the percipitation sample as measured at CAL
  • Type: Physical quantity
  • Unit: microSiemensPerCentimeter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.1
  • Missing values:
    • . = Missing or Not Measured
fieldConduct
  • Label:
  • Definition: conductivity of the precipitation sample as measured on site (Bushnell Hall)
  • Type: Physical quantity
  • Unit: microSiemensPerCentimeter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.1
  • Missing values:
    • . = Missing or Not Measured
conductFV
  • Label:
  • Definition: field conductance value indicator
  • Type: Physical quantity
  • Unit: microSiemensPerCentimeter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • . = Missing or Not Measured
sampVolume
  • Label:
  • Definition: volume of sample captured by the sample bucket in milliters
  • Type: Physical quantity
  • Unit: milliliter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.1
  • Missing values:
    • . = Missing or Not Measured
prcpRG
  • Label:
  • Definition: precipitation amount as measured by the rain gauge in millimeters. Trace amounts are indicated by -7.00
  • Type: Physical quantity
  • Unit: millimeter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: Not specified
  • Missing values:
    • . = Missing or Not Measured
subPPT
  • Label:
  • Definition: precipitation amount used by NADP/NTN in calculating weighted-mean concentrations, depositions and precipitation totals.
  • Type: Physical quantity
  • Unit: millimeter
  • Maximum: Not specified
  • Minimum: Not specified
  • Precision: 0.001
  • Missing values: None specified
labType
  • Label:
  • Definition: A code indicating the condition of the sample upon arrival at CAL
  • Type: Nominal
  • Missing values: None specified
valCode
  • Label:
  • Definition: A code which indicated whether a sample is considered valid according to NADP/NTN data validation rules.
  • Type: Code list
  • Codes:
    • 0 = invalid sample
    • d = valid dry collection period
    • t = valid trace sample
    • w = valid sample of lab type w
    • wa = valid sample of lab type wa
  • Missing values: None specified
invalCode
  • Label:
  • Definition: A code which indicated whether a sample is considered invalid according to NADP/NTN data validation rules.
  • Type: Nominal
  • Missing values: None specified
notes
  • Label:
  • Definition: Coded summary of the CAL screening codes and remarks written on the Field Observer Report Form by field personnel, CAL staff, and coordination office staff.
  • Type: Nominal
  • Missing values: None specified

Categories
Dates

Date Range: 

Tuesday, August 17, 1982 to Tuesday, April 23, 2019

Publication Date: 

Tuesday, March 14, 2023
People

Owner/Creator: 

Contact: 

Downloads